6W Waterproof Led light kit with REAR BRAKES CONTROL

(1 customer review)


Powerfull Check the Instagram video

  • 250 Lumens Led 3W each (front and rear)
  • The best light mode for esk8: higher red tail lights once you brake from your remote (as cars/motorbikes)
  • 2 x 3 watts high quality leds (1 cool white with OPTIC LENT + 1 red)
  • Waterproof system
  • Aluminium PCB leds
  • 5 Volt system (PLEASE NOTE: use this kit with our braking module ONLY)
  • Made in Italy

Out of stock


The kit include a special module that will turn the red light on stronger once you brake with your esk8 remote! It can be connected with any “vesc” inspired esk8 controller throught a 3 pin cable and to any remote that has 3 pins (signal port)

The kit include an external switch that can be installed in the enclosure without desoldering nothing, this kit has a 6watts power (3+3) at just 600mah controlled by our special “flashy” module.

The two Black mounts are made by Black ABS and 100% Waterproof, front light (cool white) has an optical lent glued in the case, the back red led cover is made by Fiber glass semi-trasparent filament.

This kit include 24AWG Wires standard lenght of 40cm on the REAR led flashing light, and 80cm on the FRONT led light, we can costumize wires lenght if you state it in the notes.

The kit is designed, 3d printed and assembled in Italy by Eskating



Additional information

Weight1 kg

1 review for 6W Waterproof Led light kit with REAR BRAKES CONTROL

  1. farmerbasti84 (verified owner)

    great product, very easy to install(plug and play at Vesc6 with 2,4ghz remote)
    fast shipping to germany

Only logged in customers who have purchased this product may leave a review.

Got something to discuss?

6 years 3 months ago

I know the brake lights work off the ppm signal from the remote, but which port on the VESC do you plug the lights into for the brake light to get this signal? UART port? Any help would be greatly appreciated.

6 years 3 months ago

Hi Ryan, the kit include a splitter, you will just need to insert one plug into the ppm signal of your vesc, then the other will go to the receiver.
No need UART port, it can also work with any other simple ESC in the market.

6 years 2 months ago

How are the lights mounted?

Josh Nicholson
6 years 2 months ago

Will this work with a simple esc like the diyeboard one?

Very interested but I want to check it will work first.

6 years 2 months ago

Hi Josh, thanks for your question! it seems that this dual esc doesn’t come with a PPM wire (as for any traditional Esc/vesc/focbox have), the PPM Signal is needed for the Light system to have the functional brakes. Maybe, if there is any additional adapter that get into that Esc (sold apart or something homemade), and come out with Gnd, Positive and Signal, then it’s ok!

5 years 10 months ago

What Lumen does the front and rear light produce?

5 years 8 months ago

Hi Thomas, sorry for the delay we just got an issue with the comments system.

The leds have 260 lumens

5 years 8 months ago

Would this kit work on a boosted board?

5 years 7 months ago

It needs a PPM signal out of the esk8 controllers, not sure Boosted board has it!

Jean Kess
5 years 4 months ago

Is it possible to have another light color in frontside? Blue or green for example..

5 years 3 months ago

Hi Jean, at the moment we have some Super cool white leds that tend to be more blue than white.
If you want, you can say in the order note to install that kind of “white blue led” instead.

1 year 6 months ago

Does itr work witzh ther BKB xenith?

1 year 6 months ago

Hello, yes it will work since it has the PPM cable. You will just need to connect our kit to it.

1 year 4 months ago

How do i huck it up.I just got it and there are 4 wires coming from my reciver

1 year 4 months ago

Hello, the kit just needs the positive, signal and ground. Please send us more infos and pictures about your receiver. Thank you

Categories: , Tag: